Halbautomatische Schrumpffolienverpackungsmaschine

Halbautomatische Schrumpffolienverpackungsmaschine

Semi automatic/manual bottle shrink wrapping machine is designed for small operations and startup companies, low cost, easy to use and widely used to wrap a wide variety of packs either as individual packs(e.g.,carton) or as collations(e.g.,bottles,cans,jars,boxes,etc.) into their respective formats (either 4 bottles x 6 bottles(1/2 liter) or in other packaging configurations such as the 3 x 4, 1-liter arrangement to be wrapped unsupported, pad-supported or tray-supported. Each shrink wrapping system comes with bundler, shrink tunnel and discharge conveyor.

With a semi automatic/manual shrink wrapping machine for bottles, The products are positioned in the front of the pneumatic infeed pusher by hand, a button is pressed which starts the wrapping cycle, the collated product is then pushed to sealing and cutting station by air cylinder. Shrink wrapper machine commonly use two reels of film which are joined to form a web, one reel is mounted at high level and the other is mounted at a low level. The product to be wrapped is passed through the web. The sealing bar descends to seal and cut the film to form an envelope around the package leaving two open ends at the sides.

After sealing, the next product to be wrapped then pushes the wrapped product into the heat shrink tunnel where recirculated hot air causes the wrapped products to shrink and tightly confirm to the contours of the contents. Once the pack is out of the chamber, forced air cooling is used to tighten the sleeve wrap to achieve a strong, secure pack ready for stacking on a pallet or placing in a shipping carton.

Sleeve Wrapper Features

- Robuste Rahmenkonstruktion aus lackiertem Stahlrohr
- Räder und höhenverstellbare Beine für Transport und Positionierung
- Flexibilität beim Verpacken von Tray- und Trayless-Packungen
• Accepts a package size of 500mm(W) X 350mm(H)
• Adjustable pusher assembly with two hand start switches
• Adjustable product hold down device to press containers of different height
• Adjustable product clamp and dead plate for containers of different diameter
• Convenient controls for easy set up
• 600mm flat maximum shrink film width
• Unique heavy duty specially profiled sealing jaw for consistently strong seals
• Teflon coated sealing blade
• Top and bottom powered film unwind
• Easy to use and maintain

Shrink Tunnel Features

- Schwerer geschweißter Stahlrahmen mit verstellbarer Höhe
- Räder und höhenverstellbare Beine für Transport und Positionierung
- Isolierte Schrumpftunnelkammer
- Heizelemente aus rostfreiem Stahl für eine lange Lebensdauer
• Shrink tunnel opening is 550cm(W) X 400mm(H)
- Einstellbare Fördergeschwindigkeit
- Einstellbare Temperaturregelung
- Doppeltes Gebläse mit einstellbarem Luftstrom
- Strapazierfähiges und antihaftbeschichtetes Förderband aus Teflongewebe
- Tunnelauslaufkühlstation für schnelle Aushärtung der Folie
- Entlade-Rollenbahn für Akkumulation und einfachen Transport

Technische Daten

Geschwindigkeit der Verpackung 5-8Packs/Min
Maximale Packungsgröße 500(W)x350(H)mm
Anwendbarer Film Polyethylen(PE)-Folie
Maximale Filmdicke 100Micro
Shrink Wrapper
Maximale Folienbreite 600mm
Sleeve Wrapper Elektrische Versorgung 220V 50/60HZ 1PH 1.50KW
Top Film Feeding Motor 220V 50/60HZ 1PH 25W
Bottom Film Feeding Motor 220V 50/60HZ 1PH 25W
Hülsenumhüllung Dimension 1040x930x1930mm
Hülsenumhüllung Gewicht 200kgs
Shrink Tunnel
Shrink Tunnel Opening 550mm(W)x400mm(H)
Shrink Tunnel Heater 380V 50/60HZ 3PH 18.40KW
Conveyor Motor 220V 50/60HZ 1PH 90W
Reciriculation Blower 220V 50/60HZ 1PH 120W(60Wx2)
Schrumpftunnel-Kammer 1500x550x400mm
Schrumpftunnel Dimension 2500x800x1480mm
Schrumpftunnel Gewicht 360kgs
Leerlauf-Rollenförderer
Dimension 1200x550x720mm
Leerlaufrolle Gewicht 60kgs

 Änderungen der technischen Daten ohne Vorankündigung vorbehalten, alle Rechte vorbehalten.

Angebot anfordern