Planta de llenado de agua de 12000-15000 botellas por hora

12000-15000 Bottles per Hour Automatic Water Filling System

This drinking water filling machine is fully automatic and high speed monoblock rinse fill cap machine and has proven to be a reliable and effective workhorse for the bottled water and non-carbonated beverages packed in PET bottles ranging from 200ml to 1500ml, which includes 32 rinse nozzles, 32 fill heads and 8 cap heads, speed of 12000 to 15000 bottles per hour can be achieved. In this water filling system, the rinsing, filling and capping process is carried out using a continuous system to achieve high speed output capacity in a fully enclosed safety interlocked chamber. Heavy duty carbon steel tubular base enclosed in stainless steel sheathing makes it stable and durable, Spare parts are processed by CE or ISO manufacturing facility to ensure the highest standards, All products contact parts are made of SS304 or standard food package plastic for hygiene and sanitary standard, PLC control and friendly HMI makes it easy to adjust and run.

Bottle Rinsing Station

Empty bottles from automatic PET bottle blowing machine or unscrambler enter the rinsing position in a continuous motion flow and are inverted to allow access to the mouth of the bottle. In practical terms, each bottle enters a stainless steel gripper plate device with plastic pad, which is installed on a rotary disk of the rinsing module. A bottle is locked in position, and then pivots 180°along a stainless steel rail to be internally rinsed, and then inverted, so the mouth of each bottle faces downwards. Once in rinsing position, a specialized high pressure nozzle sprays the interior of the bottle.

After rinsing and draining the bottle is then turned 180° so that bottle mouth is facing upwards once again. Once complete, bottles are then transferred to the filling module through a star-wheel for consistent positioning.

• The rotary rinse gripper disc is made of high quality 304 stainless steel and food grade plastic, while the rotary bearing is made of corrosion resistant,food grade materials.

• Engineered rinse nozzle placement is designed in such a way as to minimize waste water and maximize throughput.

• Engineered Inner-Gear-Motor and Transmission provide drive to facilitate the rapid speeds necessary to reach optimum production rates.

Rotary Bottle Filling Station

After bottles have been rinsed, they are conveyed to the bottle filler for processing. Bottles enter a second set of stainless steel gripper plates to,once again, be locked in position. Bottles are then filled by way of a high speed,precision gravity filler. This allows bottles to have a very precise and consistent fill level, ensuring your product has the desired look for your market. Each machine is built with a heavy duty carbon steel main frame with stainless steel outer shell. Time tested, gravity filling principles are employed during this operation.

• The water level in the reservoir vessel is controlled by electronic sensor in order to create a pressurized，
fill , which is adjustable to minimize the filling time and thus maximize production.

• Filling valves, heads and tank are made from 304 stainless steel
• Special stainless steel fill valves are utilized for long life and accurate filling.
• Filling process is mechanically controlled by bottle elevating cylinders.

Automatic Capping Station

Bottles are held in place by a uniquely designed, cam driven anti-rotational device. The cam mechanism allows nonstop movement of the bottles during the capping process while eliminating back-spin which would otherwise result in inconsistently tightened caps. The rapid capping system is designed to repetitively provide the necessary torque to tighten each cap. Once complete, the finished product will be transferred to the bottle out conveyor in preparation for labeling.

Accesorios

- Transportador aéreo de alimentación con soplador

- Transportador de salida con cadena de tablillas de mesa

- Elevador/alimentador automático de tapones

Especificaciones técnicas

Modelo	CGF 32-32-8
Capacidad de producción	12000-15000Bottles/Hr at 500mlvolume
Válvulas de enjuague	32
Nº de cabezales de llenado	32
Número de tapas	8
Diámetro de botella aplicable	Φ50 mm ~Φ90 mm
Altura de la botella aplicable	150 mm - 310 mm
Diámetro del tapón roscado aplicable	Φ25 mm ~Φ35 mm
Altura de la tapa del tornillo aplicable	15 mm - 25 mm Tapón roscado
Tensión de alimentación	220/380V 50/60HZ 3PH
Motor principal	3KW
Peso	5500 kgs(approx)
Dimensiones (sin transportador)	3400 x 2700 x 2650 mm

Planta de llenado de agua de 12000-15000 botellas por hora