Máquina llenadora y selladora de yogur de leche

Máquina llenadora y selladora de yogur de leche

Esta máquina de llenado y sellado de leche y yogur es una máquina monobloque de llenado y sellado de tapas de aluminio 2 en 1 totalmente automática, que combina tres funciones de llenado, formación de tapas de aluminio y sellado en una sola máquina y centro, y realiza los pasos principales de llenado y sellado simultáneamente en el mismo tiempo. Esta máquina de llenado y sellado combina tres funciones de llenado, formado y sellado en una sola máquina y en el centro, y realiza los principales pasos de llenado y sellado simultáneamente en el mismo tiempo, ahorrando más espacio. Esta máquina de llenado y sellado está diseñada para refrigerar leche fresca o yogur en botellas de PE, refrigerar yogur bebible en botellas de PS y Esterilización a alta temperatura de productos de larga duración bajo condiciones normales sin refrigerador como leche de soya, leche de arroz, productos de leche saborizada de larga duración, etc. productos de leche aromatizada de larga duración, productos de té, bebidas ácidas o no ácidas envasados en botellas de PP y vidrio.

Filling station

Cleaned empty bottles are conveyed to the milk and yoghurt filling machine through an in-feed air conveyor or SS Slat Conveyor. Bottles are conveyed by rotary disk, positioned lifted on cam, onto filling nozzle, valve opens and filling starts, The tank of the product is made of stainless steel 304, with internal surfaces perfectly smooth and polished, The product level in the tank is controlled by an electronic sensor in order to create a pressurized fill, Also Uses a vacuum style filling system and vacuum pump that creates a depression inside the container, which is adjustable to minimize the filling time and thus maximize production.

Foil cap punching and forming sation

The roll of foil is put on to an unwinding reel. The foil strip is unwound from the roll and fed through coactive, relatively movable dies which serve to successively cut circular blanks from the Strip and then form the same into cap form and and then to a take-up Reel. As far as we are aware, the foil strip has heretofore always been fed by a pulling action on the strip. Consequently, the foil strip must be substantially wider than the circular blanks which are cut out of the same. As a result, considerable scrap remains after the blanks have been cut from the strip and the caps formed from the blanks. The foil caps enter the chute and wait for filled bottles to pick up from chute shoe.

Sealing station

After bottles are being filled, Filled bottles are conveyed to sealing station for sealing operation, Filled bottle
picks up the cap from the cap shoe before the sealing operation. Bottles enter sealing station, the sealing head seals the foil cap tightly onto container. The filled and sealed bottles will be discharge to exit conveyor
for labeling by starwheel.

Sturdy base

The sturdy base is supported by adjustable feet and is made with heavy duty carbon steel sheathing secured to the tubular frame. The base houses the motor and drive gears. It is accessible through stainless steel removable doors. The filler capper is motorized by a single AC electric motor and controlled by an inverter, by which the machine speed can be varied depending upon the bottle size to be run.

Electronic control

The electric panel contains the inverter, motor starters, PLC, and other electro mechanical components. The inverter enables the operator to vary the rate of production to synchronize the filling sealing machine with other packaging machines running on the same line. An emergency stop button is mounted on front of touch screen panel.

Características principales

• Heavy duty carbon steel base shielded by stainless steel construction makes machine run stably and
  reliable.
• Inverter control makes filling and sealing synchronous.
• PLC control and touch screen
• No bottle, No filling and No bottle, No sealing
• Easy cleaning and maintain
• All parts contacts liquid are stainless steel
• Washdown
• Feeding screw and star wheel

• All electric parts are inside machine base

• Rinsing and capping can be integrated as 4 in 1 or 5 in 1

• Can be connected with CIP for cleaning
• Quick changeover to reduce down time for different sizes of bottles
• Grease hole to add grease for lubricating
• Electric motorized bottle height adjustment for optional
• Gravity or Piston filling for thin and viscous liquid
• Uses a vacuum style filling system and vacuum pump that creates a depression inside the container
• Sealing temperature is regulated for different material
• Fast and easy changeover to various bottle size

Especificaciones técnicas

Capacity(Bottles per Hour)400080001000018000
Nº de cabezales de llenado10202430
Nos of Sealing Head10121430
Diámetro de botella aplicableΦ50 mm ~Φ90 mm
Altura de la botella aplicable110 mm – 280 mm
Power Consumption(kw) 33.23.24
Dimension(meter) 1.6*1.4*2.11.8*1.6*2.11.9*1.6*2.12.4*2.2*2.1

 

* Especificaciones sujetas a cambios sin previo aviso, Todos los derechos reservados.

Solicitar presupuesto